You are in a vaping mood and picked your device to inhale your new e-liquid, but suddenly you see hot e-liquid has jumped at your mouth. You also might start hearing a loud crackling sound every time you vape. It is not a thing to worry about, “spit back”, cracking noises, popping, and even gurgling sounds are common issues that often happen irrespective of the device you are using, and there are ways to fix these minor issues. You only need to understand why such a thing happens and adjust accordingly.

In many cases, the reason behind the spitting is that e-liquid collects on the coil and is cooked instead of vaporized. This results in heating and eventually spitting like water when the same sits on an extremely hot surface.

How Do I Stop My Vape from Spitting Back?

If spitting and cracking are troubling you, follow the tips below and solve the crackling sounds and spit.

Prime Your Coils 

Initially, the thing you need to do is prime your coils but do it patiently. The best way is to paint the exposed cotton with vape juice. But the same should be on a minuscule scale, and make sure to leave it for 5 minutes before firing a unit that allows cotton inside the coil to soak nicotine eJuice and make it ready for that first tasty vape.

Clean Your Tanks Chimney

You can take some cotton buds, take the lid off your tank and dab the same on the inside of the coil. It will soak all reservoirs of vape fluid collected around the heating element. You can also disassemble the tank to wipe its bottom, where reservoirs of vape juices are built up. You can also have some rolled-up tissue paper. Remove your drip tip, and insert it down into the chimney of your tank. It would soak the excess e-liquid reducing all the chances of spitting and popping.

Flick Your Vape Downwards onto Paper Towel

If you are facing a spit back/cracking vape issue and are not willing to throw your coil, you can grip your unit firmly and flick it downwards on the paper towel so that the mouthpiece swings down in a fast arc. The inertia will allow a substantial pool of vape juice to emerge. 

Check Your PG and VG Ratio

Always check your PG and VG ratios. High-quantity PG liquid is thinner than e-liquid having a higher VG ratio. Due to this the coil will soak e-liquid quickly, adsorb much liquid and cause spitting. An e-liquid with a higher VG ratio might take longer to soak, making it least likely to spit. 

Low-Level Wattage

Find your wattage level if you use a sub-ohm device. You might have a low voltage or wattage. Low indicates your device is not sufficiently heating the e-juice, turning it into vapor. Spit back and popping sounds happen when the e-liquid overflows the tank. If you use an RTA with loose airflow, the situation can get worse, resulting in the air pushing into an apparatus. 

Increase your wattage by a maximum of 10 watts if it is low. When popping lessens, you can then identify the issue. You might also try reducing your airflow changes. Try to decrease the air pressure by moving the tank’s collar. To achieve optimal vaping, try to use a kit with airflow and wattage.

How to Prevent Popping and Spitting In Your Vape?

Popping and Spitting are annoying. Spitting means when extremely hot e-liquid droplets are suddenly pushed into your mouth while vaping. It is possible to find the coil of an RDA (rebuildable dripping atomizer) firing, accompanied by popping noises. 

You can prevent the same by adopting the following measures: 

• Avoid overfilling the tank
• Keep the wattage level high
• Stop inhaling too hard
• Increase its airflow
• Ascertain to use the right e-liquid
• Keep your chimney clean

Though spitting vape is not something to worry about, a liquid hot liquid on your lips now and then can be annoying. However, with the tips mentioned above, you can prevent spitting from happening.

What Type of Vapes Have Less Spit Back?

If spit back is a cause of irritation, it is best to opt for a less powerful vape. While no vapes are free, you will find smaller MTL vape systems are less likely to cause hot vape juice in your direction. MTL vapes and many pod vape systems utilize small wattage ranges and coils. These are often more compact with less of the core exposed. This means that the vape juice can get less agitated even if there is not enough room for building up and less chance of flying towards you.

Do not use vapes which have large wattage outputs and big, wide-bore mouthpieces if the scope of spit back is enough to put off vaping. A small pod system can be a great choice for anyone who needs moderate and classy vape and does not cause spit back as it has draw-activation technology.
Following are the few types of vapes that do not cause spitting:

• Mesh Coil tanks
• Ceramic Coils
• Temperature Control (TC) Vaping:
• Top-Airflow Tanks: 

It's important to note that spit back can occur with any type of vape. However, using one of these options can help reduce the likelihood of it happening. The best is to experiment with different tanks and coils to find what works best for you. Adopting the methods below, and can prevent vape from spitting, cracking, and enjoying vaping.

Why is My Elf Bar Gurgling?

If your Elf Bar is gurgling and spitting, it can most likely be due to the power being low so you need to charge it. Elf Bar was one of the first disposable vape pen to offer a mesh coil which should stop spitting. However, when your power is too low, it can't vaporize the nic salt juice it contains. This doesn't allow it to properly vaporize.