Geek Bar Pulse is one of the best disposable vapes if you are looking for lasting usage, attractive flavors, and powerful usage. However, it is a common problem that the battery drains after you charge it. Sometimes there is a problem with the device while sometimes it is because of bad usage practices.

 

Learn what causes this problem and how you can solve it in our guide below.

Quick Look

• Why Does the Geek Bar Pulse Keep Draining After Charging?
• How to Fix the Geek Bar Pulse Keeps Draining After Charging?
• Why is My Disposable Vape Battery Draining So Fast?
• Verdict

Why Does the Geek Bar Pulse Keep Draining After Charging?

The following are some of the reasons that can make the Geek Bar Pulse on a continuous discharge even after being charged fully. That is if the battery is overcharged, then the battery capability is going to be reduced and the battery lifespan shortened. Intensive use as well as prolonged use also results in battery drain out.

Furthermore, extreme high and low temperatures affect the performance of the battery by draining it quickly. Battery failure could also be the reason behind early discharge or there could be some internal issue.

Lastly, using wrong or otherwise incompatible charging equipment has been known to reduce battery performance due to the damage caused to it. These problems can be solved by correctly charging the battery, correctly using the device and properly storing it.

How to Fix the Geek Bar Pulse Keeps Draining After Charging?

Now that you know the main cause behind this problem, let’s discuss some of the most effective solutions. Trying these solutions may help you make your battery last longer.

1. Stop Using the Pulse Mode Too Often

Using the Pulse Mode often decreases the battery’s efficiency since delivering a powerful, continuous hit takes more energy. To solve it, it is recommended to switch to the standard mode more frequently while using the Pulse Mode sparingly. This will help to save battery life.

Also, increase the time between draws, and avoid frequent vaping sessions. This can be very useful and using Normal mode can help in prolonging the battery life of the Geek Bar Pulse and make it last longer before needing recharging.

2. Prevent Overheating the Geek Bar Pulse

Overheating is a factor that has impacts on the battery life of your Geek Bar Pulse, in which it discharges more than usual. Do not expose the device to direct sunlight or heat as this causes it to overheat. It is also highly advisable to keep your vape in a cool place when you are not using it.

Also, avoid frequent and prolonged vaping sessions that can lead to overheating of the device. By controlling the temperature, you can safeguard the battery, and use it for a more extended period and with better efficiency.

3. Let It Rest for a While After Charging

It is also advisable to discharge your Geek Bar Pulse for a while after charging as this can bring stability in the battery charging process. It is recommended to unplug the fully charged device and allow it to cool for approximately fifteen to thirty minutes.

This period is critical in cooling the battery and proper positioning to avoid immediate drainage and enhance performance. This procedure ensures that the battery of the vaporizer is healthy and lasts for a longer period; it will hold charge better and offer a better vaping experience.

4. Make Sure That You Are Using the Right Charger

Charging your Geek Bar Pulse with the appropriate charger is essential for battery health. An incompatible or faulty charger can bring an effect on the battery which leads to its rapid discharge. It is also important to only use high-quality chargers that support the rated voltage and amps (usually 5V 1A).

 

Before plugging the device, check the charger amperage to determine whether it is correct for the device. So that you may get the best out of it for the longest time possible without needing to be charged again.

Why is My Disposable Vape Battery Draining So Fast?

Are you facing this battery drainage issue with your Geek Bar Pulse or any other disposable vape? Below are some reasons that cause this problem, and chances are that you are also facing one of them.

1. You Might Be Overcharging the Vape or Using Wrong Charger

Using an incompatible charger for your disposable vape or overcharging the battery is also known to result in faster battery discharge. Charging the battery for a long time also decreases its capacity.

Further, charging with an incompatible charger can compromise the battery of the device draining it more regularly than required. It is always safe to use a charger that meets the charging specifications provided by the manufacturer. There is a need not to overcharge the device so that the battery will not deteriorate quickly, thus it should be charged only when needed.

2. The Usage Frequency is Too High

One other drawback is that constant and rigorous use of your disposable vape will drain out the battery. Some of the factors that affect battery life include how frequently you use your vape. The more you use it, the faster the battery will get used up.

It also consequently shortens the battery life whenever one takes long and continuous puffs of the vape. To maintain battery longevity, the user should consider limiting the number of vaping sessions and usage of the vape.

It is recommended to allow the vape to remain inactive during breaks in use to avoid its battery discharge and general useful life-shortening.

3. The Vape is Exposed to Extreme Temperatures

Another factor that will cause the battery to experience poor performance is exposure to either high or low heat. The battery is less efficient when exposed to very high temperatures because it depletes faster, and in very low temperatures the performance of the battery is compromised.

To avoid this, store and use your vape in moderately warm climates that do not involve direct sunlight or freezing conditions. Proper storage of the device in a dry, cool environment ensures that the batteries are charged optimally and that the battery power lasts long

4. Your Disposable Vape Has a Faulty Battery

One common cause of fast depletion of the battery power in your disposable vape is if the battery is faulty. Malfunctions or gradual physical degradation of the battery may lead to poor performance.

For example, if you realize that your battery discharges much faster than it should, even though you follow all the rules for using and charging your device, it may be best to replace your vape. You can reach out to the manufacturer or the retailer and seek assistance in identifying whether the battery is faulty and whether you require a new one.

Verdict

If you were also facing this problem with your Geek Bar Pulse where its battery kept draining after you charged it then we hope that this guide has helped you solve the problem. However, if you are still unable to solve it then it might be an issue with your device. So, if you recently bought your Geek Bar Pulse then it might be a good idea to replace it if possible.

Related Articles: