You should treat your disposable vapes as though they are mobile smartphones; whatever you know would damage your smartphone, don’t let such happen to your vape – falling to the sand or water, overcharging, or trying to disassemble the device when you’re not a professional technician. Disposable vapes are fragile, and at the slightest instance, you could have them totaled.

The Geek Bar Pulse X vape has received many complaints from its users, including battery damage concerns. Well, your Geek Bar Pulse X’s battery can be damaged from constant overcharging or undercharging using a low-quality charger. But, overcharging isn’t the only thing that damages a vape’s battery, there are other factors you should know about. This article explains a handful of information about the Geek Bar Pulse X vape and its battery.

What Does it Mean to Overcharge or Undercharge a Battery?

Overcharging is when you leave the charger still plugged in after the vape is fully charged already at 100%. While undercharging refers to when you use a low-voltage charger to charge your vape’s battery; not only do low-voltage chargers slow down the charging speed of your device, but they also cause more damage to the battery than using higher-voltage chargers.

Why Overcharging or Undercharging is Not Good for Your Geek Bar Pulse X Vape?

The Geek Bar Pulse X vape is quite a solid one; the build is sturdy and the materials used are reliable. Of course, the battery is solidly built too; it lasts over a long time after a full charge depending on your vaping culture. However, just like every other battery, constantly overcharging the battery will make it weak, and over time, get it damaged.

Similarly, undercharging a battery can also get it damaged. To curb this effect, most manufacturers do include an “overcharge” protection feature on their devices to prevent the device’s battery from getting damaged due to overcharging. Vapes are equipped with Li-ion or Li-Po batteries, which are quite reactive to high power.

When a vape’s battery is overcharged, it causes the device (battery) to overheat, and if this continues to go on for a seemingly longer time, it starts to weaken the battery’s components, causing the battery to run down more quickly than usual, and also causing the device (vape) to heat up at the slightest instance.

Undercharging a vape’s battery means the battery won’t be getting sufficient voltage from the charging, and over time, this causes the battery to lose stability and break down earlier than the manufacturer must have predicted. Undercharging may not cause overheating at the initial stages, but once the battery components get damaged, then overheating will be next.

How to Fix Geek Bar Pulse X Battery Issues?

Apparently, if your vape’s battery is already damaged due to overcharging or undercharging, sadly, there’s nothing you can do about that – you just have to purchase a new Geek Bar Pulse X vape and ensure not make the same mistake again.

The Geek Bar Pulse X battery is not removable; it is built into the device and is not intended to be removed at any point. Although some DIYers find their way to disassemble their vapes to troubleshoot a problem, this act is not recommendable, as it often causes more damage to whatever was wrong before you opened the vape.

To prevent Geek Bar Pulse X battery damage, never use a low-voltage charger to charge the device, and stop charging it after it reaches 90% - 100%. Always use the cable that comes with the vape and a corresponding charger head.

Also, practice battery calibration it helps Li-Ion and Li-Po batteries last longer. Calibrating your battery means charging it to 100%, then use it until it depletes totally, then charging it back to 100% again and depleting it still – you have to do this for three consecutive times, and then continue your regular charging-usage schedules.

Conclusion

If you can monitor your Geek Bar Pulse X’s charging, it is advisable to disconnect the charger when the device is charged halfway, don’t wait until it gets to 100%. Overcharging your vape won’t make the battery last longer than it should, instead, it damages the battery and causes the device to overheat.

FAQs

How can I tell if my Geek Bar Pulse X battery is damaged?

The common signs of a damaged battery are faster depletion and overheating of the device. When your vape’s battery starts depleting much faster than usual, it could be that it is weak already – due to constant overcharging.

Can I use any charger with my Geek Bar Pulse X?

Always use the cable that comes with the vape inside the box and match it with a moderate-capacity charger head. Your smartphone’s charger head would do, provided it’s not above 30W in rating.

What is the optimal charging level for the Geek Bar Pulse X?

From 50% to 80% is ideal, but if you let it get to 100%, that’s still cool – but don’t make it frequent. The battery on Geek Bar Pluse X vape might be solidly built, but it’s yet fragile.

How often should I check my Geek Bar Pulse X for signs of damage?

Apparently, you should monitor your vape closely at every instance to see if something’s going out of the ordinary. There is no particular timeframe for checking your vape for possible damages – they are fragile devices, so you should check them more often.

Is it safe to leave my Geek Bar Pulse X charging overnight?

Definitely NO. If it’s down and you want to leave it to charge overnight, it’d be best to not charge it at all, and wait until the morning. The battery charges pretty fast – in just about 30 minutes, it could add enough battery capacity to keep you going for the day.

What should I do if my Geek Bar Pulse X battery is already damaged?

Obviously, the only thing you can do at this point is to get a new Geek Bar Pulse X vape – maybe this time, you should seize the opportunity to treat yourself to some new flavors that hit harder.

Can I replace the battery in my Geek Bar Pulse X?

You may attempt, but the battery is not meant to be replaced. Instead, as “disposable vapes,” it is expected that you toss the device once it has a fault and get a new one – it’s relatively affordable anyway.

How can I maximize the lifespan of my Geek Bar Pulse X battery?

To make your Geek Bar Pulse X’s battery last longer, always use the right charger and cable to charge the device, and don’t let it charge overnight. Also, calibrate the battery once in a while, and you’ll see the device last for a long time.

Related Articles:

• Who Takes The GRAND Win: Flum Mello 20000 Or Geek Bar Pulse X 25000?
• Geek Bar Skyview 25K Vs. Geek Bar Pulse X 25K: Which One Should I Buy?
• Geek Bar Pulse X Spec & Flavors Review — Geek Bar Pulse Upgraded Version
• Why Does Vaping Geek Bar Pulse X Make Me Hiccup?
• Geek Bar Pulse X Battery Problems? Here’s How To Fix Them Fast!
• Geek Bar Pulse X: To Buy Or Not To Buy? What You Need To Know Before Buying!